Fayette, AL Mold Damage Remediation
Mold can produce allergens and irritants and has the potential to cause other health effects. Mold can spread quickly through your Fayette home or business in as little as 48 hours. If you suspect that your home or business has a mold problem, we can inspect and assess your property. If mold is found, we have the training, equipment, and expertise to remediate your mold infestation.
Learn more about mold and what to do until help arrives by reviewing these mold damage tips.
SERVPRO of Russellville, Hamilton and Fayette
- 24-Hour Emergency Service
- Faster to Any Size Disaster
- Highly Trained Mold Remediation Technicians
- Specialized Mold Remediation Equipment
- A Trusted Leader in the Restoration Industry
- Locally Owned and Operated
If You See Signs of Mold, Call Us Today – (205) 921-1449
Confusion and misunderstanding surround the topic of mold and mold remediation. Some restoration businesses even make claims to remove all mold from a building. This is a fallacy. Mold spores occur naturally almost everywhere, both indoors and outdoors. These microscopic spores float along in the air and can enter a home or business through windows and HVAC systems. Consider these facts:
- Mold is present almost everywhere, indoors and outdoors.
- Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
- Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins.
- Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
- Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
- Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.
Faster to Any Size Disaster
Mold spreads quickly, so a minor mold infestation can quickly escalate into a major problem. We’re dedicated to responding immediately when you contact us. A fast response lessens the damage, limits further damage, and reduces cost.
Locally Owned, with National Resources
SERVPRO of Russellville, Hamilton and Fayette is locally owned and operated, so we are part of the Fayette community too. When you have a water or mold damage issue, we’re already nearby and ready to help. We’re also part of a network of over 2000, including special Disaster Recovery Teams placed strategically throughout the country to respond to large-scale fire, water, and storm disasters.
We are proud to serve our local communities:
- Russellville, AL
- Fayette, AL
- Hamilton, AL
- Vernon, AL
- Haleyville, AL
- Winfield, AL
- Sulligent, AL
- Guin, AL
- Red Bay, AL
Highly Trained Water and Mold Restoration Specialists
We specialize in water and mold damage restoration, with advance training in restoration techniques and the experience and specialized equipment to quickly restore your property. Learn about our water damage training and certificates.
The Mold Remediation Process
Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:
Step 1: Emergency Contact - (205) 921-1449
The mold cleanup and restoration process begins when you call us. Our representative will ask a series of questions to help us determine the necessary equipment, resources, and personnel.
Step 2: Inspection and Mold Damage Assessment
We carefully inspect your property for visible signs of mold. Mold feeds on cellulose and water and can be hidden from plain view. We use various technologies to detect mold and hidden water sources.
Step 3: Mold Containment
To keep the mold spores from spreading further, we will use various mold containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your Fayette, AL home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of mold.
Step 4: Air Filtration
Our specialized filtration equipment allows our professionals to capture microscopic mold spores out of the air. We utilize powerful “air scrubbers” and HEPA vacuums to prevent the spread of these mold spores while the mold remediation is in process.
Step 5: Removing Mold and Mold-Infested Materials
The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. We’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. It may be necessary to remove and dispose of mold-infested porous materials, like drywall and carpeting, to remediate heavy mold growth.
Step 6: Cleaning Contents and Sanitizing
SERVPRO of Russellville, Hamilton and Fayette will use a variety of cleaning techniques and products to clean your furnishings and personal belongings. Since mold infestations also cause a persistent musty odor, our professionals are also trained to remove odors and provide deodorization using fogging equipment.
Step 7: Restoration
Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.
SERVPRO knows Mold
In Fayette, AL, SERVPRO of Russellville, Hamilton and Fayette is ready to tackle and resolve any mold issues that arise. SERVPRO professionals understand the anxiety that can happen when a homeowner uncovers mold. Let us help put your worries to rest. Our knowledgeable crew is ready with the gear needed to tackle any mold job. Reach us at (205) 921-1449 - We’re ready to activate our team to remediate your mold.